Close filters
 
  •  
from to
No results were found for the filter!
Hexagonal driver 12mm x 5.5mm
Hexagonal driver 12mm x 5.5mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. The thickness corresponds to the standard of 5.5mm.
€6.49 *
Wheel spacer 20mm for 1:10
Wheel spacer 20mm for 1:10
The improved assembly strategy of this widening improves handling and stability. It is recommended to use screw locking lacquer or alternatively Teflon tape to secure the central screw on the axle against loosening. By widening the lane,...
€21.49 *
Front steering knuckles - Himoto Bigfoot
Front steering knuckles - Himoto Bigfoot
Aluminium parts milled from solid material to reinforce the chassis
€15.80 *
Front lower wishbone - Himoto Bigfoot
Front lower wishbone - Himoto Bigfoot
Aus Vollmaterial gefräste Aluminiumteile zur Verstärkung des Fahrwerks
€16.19 *
Rear lower wishbones - Himoto Bigfoot
Rear lower wishbones - Himoto Bigfoot
Aluminium parts milled from solid material to reinforce the chassis
€14.99 *
Front upper wishbone - Himoto Bigfoot
Front upper wishbone - Himoto Bigfoot
Aluminium parts milled from solid material to reinforce the chassis
€15.50 *
Hexagonal driver 12mm x 9mm
Hexagonal driver 12mm x 9mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. Instead of 5mm they measure 9mm in thickness. This results in a discreet track widening on most models.
€5.49 *
Wheel spacer 15mm / 12mm-17mm adapter
Wheel spacer 15mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 15mm, i.e....
€24.49 *
Wheel spacer 30mm / 12mm-17mm adapter
Wheel spacer 30mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 30mm, i.e....
€24.49 *
Servo arm 25T, 28 mm
Servo arm 25T, 28 mm
Aluminium parts milled from solid material to reinforce and stiffen the steering. The servo lever noticeably improves the steering response compared to the plastic version.
€5.99 *
Wheel spacer 25mm for 1:10
Wheel spacer 25mm for 1:10
The wheel spacers are very easy to install and give the RC vehicle a special optical touch. You also add a new dimension to the suspension geometry configuration. These are CNC-machined full aluminium parts with 12mm hexagonal wheel...
€21.49 *
Viewed