No results were found for the filter!
Hexagonal driver 12mm x 5.5mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. The thickness corresponds to the standard of 5.5mm.
Hexagonal drivers 17mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers.
Wheel spacer 20mm for 1:10
The improved assembly strategy of this widening improves handling and stability. It is recommended to use screw locking lacquer or alternatively Teflon tape to secure the central screw on the axle against loosening. By widening the lane,...
Hexagonal driver 12mm x 9mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. Instead of 5mm they measure 9mm in thickness. This results in a discreet track widening on most models.
Standard axle ball bearing set Reely 1:10
Standard stainless steel bearing with water protection, 2-piece set complete for one wheel suspension (can be used at the front and rear), pre-greased.
Aluminium Differential 1:10
The differential is completely mounted. The aluminium differential bell makes it very resistant and temperature resistant.
Front steering knuckles
Very stable steering knuckle with good bolting for high tightening torques. The grub screws must urgently be secured with RaguTite. Please also refer to our installation guide for the steering knuckles, with useful tips for successful...
Bruchsicheres Fahrwerksteil aus Aluminium mit sehr stabilen Schraubgewinden für große Anzugsdrehmomente. RaguTite wird empfohlen, um die Schrauben zu sichern.
Front lower wishbone
Aluminium part milled from solid material to reinforce the chassis Useful tips for installing these wishbones can be found in the installation guide.
Grub screw for front steering knuckles
The grub screws must urgently be secured with RaguTite. They are suitable for the RAGUA steering knuckles. Please also refer to our installation guide for the stub axle, with useful tips for successful installation.
Rear wheel carrie
The screw connections are particularly resilient and can withstand high tightening torques. The bushings for the ball bearings are manufactured very precisely. The wheel carrier has 3 optional attachments for the upper wishbone, which...
Rear shock absorbers
The suspension struts fit especially for the rear axle. They are slightly longer than those for the front axle. They are adjustable in hardness by an adjustable upper spring plate and have a larger piston diameter than the original...