Close filters
 
  •  
from to
2 From 3
No results were found for the filter!
Rear wheel carrie
Rear wheel carrie
The screw connections are particularly resilient and can withstand high tightening torques. The bushings for the ball bearings are manufactured very precisely. The wheel carrier has 3 optional attachments for the upper wishbone, which...
€14.61 *
Front lower wishbone
Front lower wishbone
Aluminium part milled from solid material to reinforce the chassis Useful tips for installing these wishbones can be found in the installation guide.
€14.61 *
Wheel spacer 15mm / 12mm-17mm adapter
Wheel spacer 15mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 15mm, i.e....
€20.95 *
Wheel spacer 30mm / 12mm-17mm adapter
Wheel spacer 30mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 30mm, i.e....
€23.87 *
Steering linkage
Steering linkage
incl. servo saver, very robust and precise, aluminium milled solid material
€19.49 *
axles
axles
Standard axles, part number: 530981
€7.90 *
Front shock absorbers
Front shock absorbers
The suspension struts fit especially for the front axle. They are slightly shorter than those for the rear axle. They are adjustable in hardness by an adjustable upper spring plate and have a larger piston diameter than the original...
€19.00 *
Rear shock absorbers
Rear shock absorbers
The suspension struts fit especially for the rear axle. They are slightly longer than those for the front axle. They are adjustable in hardness by an adjustable upper spring plate and have a larger piston diameter than the original...
€19.00 *
High-quality axle ball bearing set Reely 1:10
High-quality axle ball bearing set Reely 1:10
High-quality stainless steel bearings with dust and water protection, 2-piece set complete for one wheel suspension (can be used at the rear and front), pre-greased.
€5.84 *
Servo arm 25T, 28 mm
Servo arm 25T, 28 mm
Aluminium parts milled from solid material to reinforce and stiffen the steering. The servo lever noticeably improves the steering response compared to the plastic version.
€5.84 *
Rear lower wishbone
Rear lower wishbone
Aluminium parts milled from solid material to reinforce the chassis
€14.61 *
Wheel spacer 25mm for 1:10
Wheel spacer 25mm for 1:10
The wheel spacers are very easy to install and give the RC vehicle a special optical touch. You also add a new dimension to the suspension geometry configuration. These are CNC-machined full aluminium parts with 12mm hexagonal wheel...
€19.49 *
2 From 3
Viewed