Close filters
 
  •  
from to
1 From 3
No results were found for the filter!
Reely Mittelwelle Zentral Aluminium
Reely Mittelwelle Zentral Aluminium
Die Zentralemittelwelle verbindet beide Differentialblöcke Länge: 172mm
€11.99 *
Hochwertiges Differential-Kugellager Set Reely 1:10
Hochwertiges Differential-Kugellager Set Reely...
Hochwertige Edelstahllager mit Staub- und Wasserschutz, 2-teiliges Set komplett für ein Differantial, vorgefettet. Häufig ist der Verschleiß des Differentials auf defekte Lager zurückzuführen. Diese Set wertet die Lagerrung des...
€5.84 *
Haltebolzen für Querlenker 60mm
Haltebolzen für Querlenker 60mm
Haltebolzen für alle Kunden die gern Kunststoffquerlenker fahren möchten und trotzdem nicht auf unsere Haltebolzen verzichten wollen. Länge: 60mm Lieferumfang: 1x Haltebolzen, 2x E-Ringe
€3.89 *
Hexagonal driver 12mm x 5.5mm
Hexagonal driver 12mm x 5.5mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. The thickness corresponds to the standard of 5.5mm.
€6.33 *
Wheel spacer 20mm for 1:10
Wheel spacer 20mm for 1:10
The improved assembly strategy of this widening improves handling and stability. It is recommended to use screw locking lacquer or alternatively Teflon tape to secure the central screw on the axle against loosening. By widening the lane,...
€20.95 *
Hint!
Differential Repair Kit für Reely 1:10
Differential Repair Kit für Reely 1:10
Das Differential ist das wichtigste Bauteil am ganzen Auto, Antrieb und Bremse in einem. Wir haben festgestellt, bei einem Differentaildefekt kommt es zu 95% immer zum selben Problem - Das Kegelzahnrad am Mitnehmer bricht! Dieses Kit...
€3.99 *
Hexagonal driver 12mm x 9mm
Hexagonal driver 12mm x 9mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. Instead of 5mm they measure 9mm in thickness. This results in a discreet track widening on most models.
€6.33 *
Standard axle ball bearing set Reely 1:10
Standard axle ball bearing set Reely 1:10
Standard stainless steel bearing with water protection, 2-piece set complete for one wheel suspension (can be used at the front and rear), pre-greased.
€3.22 *
Hint!
Aluminium Differential 1:10
Aluminium Differential 1:10
The differential is completely mounted. The aluminium differential bell makes it very resistant and temperature resistant.
€32.12 *
Wheel spacer 15mm / 12mm-17mm adapter
Wheel spacer 15mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 15mm, i.e....
€20.95 *
Wheel spacer 30mm / 12mm-17mm adapter
Wheel spacer 30mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 30mm, i.e....
€23.87 *
Hint!
Front steering knuckles
Front steering knuckles
Very stable steering knuckle with good bolting for high tightening torques. The grub screws must urgently be secured with RaguTite. Please also refer to our installation guide for the steering knuckles, with useful tips for successful...
€15.99 *
1 From 3
Viewed