The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. The thickness corresponds to the standard of 5.5mm.

The improved assembly strategy of this widening improves handling and stability. It is recommended to use screw locking lacquer or alternatively Teflon tape to secure the central screw on the axle against loosening. By widening the lane,...

Standard stainless steel bearing with water protection, 2-piece set complete for one wheel suspension (can be used at the front and rear), pre-greased.

The differential is completely mounted. The aluminium differential bell makes it very resistant and temperature resistant.

The grub screws must urgently be secured with RaguTite. They are suitable for the RAGUA steering knuckles. Please also refer to our installation guide for the stub axle, with useful tips for successful installation.

The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 15mm, i.e....

Aluminium part milled from solid material to reinforce the chassis Useful tips for installing these wishbones can be found in the installation guide.

The suspension struts fit especially for the rear axle. They are slightly longer than those for the front axle. They are adjustable in hardness by an adjustable upper spring plate and have a larger piston diameter than the original...

The suspension struts fit especially for the front axle. They are slightly shorter than those for the rear axle. They are adjustable in hardness by an adjustable upper spring plate and have a larger piston diameter than the original...

High-quality stainless steel bearings with dust and water protection, 2-piece set complete for one wheel suspension (can be used at the rear and front), pre-greased.

Aluminium parts milled from solid material to reinforce and stiffen the steering. The servo lever noticeably improves the steering response compared to the plastic version.

The wheel spacers are very easy to install and give the RC vehicle a special optical touch. You also add a new dimension to the suspension geometry configuration. These are CNC-machined full aluminium parts with 12mm hexagonal wheel...