Close filters
 
  •  
from to
1 From 2
No results were found for the filter!
Hexagonal driver 12mm x 5.5mm
Hexagonal driver 12mm x 5.5mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. The thickness corresponds to the standard of 5.5mm.
€6.49 *
Wheel spacer 20mm for 1:10
Wheel spacer 20mm for 1:10
The improved assembly strategy of this widening improves handling and stability. It is recommended to use screw locking lacquer or alternatively Teflon tape to secure the central screw on the axle against loosening. By widening the lane,...
€21.49 *
Hexagonal driver 12mm x 9mm
Hexagonal driver 12mm x 9mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. Instead of 5mm they measure 9mm in thickness. This results in a discreet track widening on most models.
€5.49 *
Standard axle ball bearing set Reely 1:10
Standard axle ball bearing set Reely 1:10
Standard stainless steel bearing with water protection, 2-piece set complete for one wheel suspension (can be used at the front and rear), pre-greased.
€3.30 *
Hint!
Aluminium Differential 1:10
Aluminium Differential 1:10
The differential is completely mounted. The aluminium differential bell makes it very resistant and temperature resistant.
€24.95 *
Front steering knuckles
Front steering knuckles
Very stable steering knuckle with good bolting for high tightening torques. The grub screws must urgently be secured with RaguTite. Please also refer to our installation guide for the steering knuckles, with useful tips for successful...
€14.99 *
Grub screw for front steering knuckles
Grub screw for front steering knuckles
The grub screws must urgently be secured with RaguTite. They are suitable for the RAGUA steering knuckles. Please also refer to our installation guide for the stub axle, with useful tips for successful installation.
€3.25 *
Wheel spacer 15mm / 12mm-17mm adapter
Wheel spacer 15mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 15mm, i.e....
€24.49 *
Wheel spacer 30mm / 12mm-17mm adapter
Wheel spacer 30mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 30mm, i.e....
€24.49 *
Rear wheel carrie
Rear wheel carrie
The screw connections are particularly resilient and can withstand high tightening torques. The bushings for the ball bearings are manufactured very precisely. The wheel carrier has 3 optional attachments for the upper wishbone, which...
€14.99 *
Front upper wishbone
Front upper wishbone
Aluminium parts milled from solid material to reinforce the chassis Useful tips for installing these wishbones can be found in the installation guide.
€14.99 *
Front lower wishbone
Front lower wishbone
Aluminium part milled from solid material to reinforce the chassis Useful tips for installing these wishbones can be found in the installation guide.
€14.99 *
1 From 2
Viewed