Close filters
 
  •  
from to
1 From 2
No results were found for the filter!
Hexagonal driver 12mm x 5.5mm
Hexagonal driver 12mm x 5.5mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. The thickness corresponds to the standard of 5.5mm.
€6.49 *
Wheel spacer 20mm for 1:10
Wheel spacer 20mm for 1:10
The improved assembly strategy of this widening improves handling and stability. It is recommended to use screw locking lacquer or alternatively Teflon tape to secure the central screw on the axle against loosening. By widening the lane,...
€21.49 *
Hexagonal driver 12mm x 9mm
Hexagonal driver 12mm x 9mm
The hexagonal drivers made of pure aluminium are more solid than the mostly original drivers. Instead of 5mm they measure 9mm in thickness. This results in a discreet track widening on most models.
€5.49 *
Wheel spacer 15mm / 12mm-17mm adapter
Wheel spacer 15mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 15mm, i.e....
€24.49 *
Wheel spacer 30mm / 12mm-17mm adapter
Wheel spacer 30mm / 12mm-17mm adapter
The wheel spacers are especially optically absolutely convincing. They improve the look of the RC car and at the same time increase its safety against tipping in delicate driving situations. The RC Car is widened by 2 times 30mm, i.e....
€24.49 *
Rear shock absorbers
Rear shock absorbers
The suspension struts fit especially for the rear axle. They are slightly longer than those for the front axle. They are adjustable in hardness by an adjustable upper spring plate and have a larger piston diameter than the original...
€18.99 *
Front shock absorbers
Front shock absorbers
The suspension struts fit especially for the front axle. They are slightly shorter than those for the rear axle. They are adjustable in hardness by an adjustable upper spring plate and have a larger piston diameter than the original...
€18.99 *
Wheel spacer 25mm for 1:10
Wheel spacer 25mm for 1:10
The wheel spacers are very easy to install and give the RC vehicle a special optical touch. You also add a new dimension to the suspension geometry configuration. These are CNC-machined full aluminium parts with 12mm hexagonal wheel...
€21.49 *
Pull rod
Pull rod
It is an extremely stable version made of aluminium and steel. The tie rods can be used both as upper wishbones and as link rods. The lock nuts ensure a very firm fixing of the chassis configuration and remain easy to handle at the same...
€9.99 *
Front wheel carrier - Traxxas Slash
Front wheel carrier - Traxxas Slash
It is an extremely stable CNC-milled solid aluminium part. In order to guarantee perfect ease of steering mechanics, this product is optimised for interaction with our aluminium steering knuckle. Minimal adjustments may be required for...
€13.98 *
Rear wishbone brace - Traxxas Slash
Rear wishbone brace - Traxxas Slash
It is an extremely stable CNC-milled solid aluminium part. Compared to the original part, 25% weight is saved.
€3.19 *
Rear damper bridge - Traxxas Slash
Rear damper bridge - Traxxas Slash
It is an extremely stable CNC-milled solid aluminium part. The aluminium damper bridge stiffens the chassis and ensures a longer service life for the dampers used, since constant bending moments are prevented.
€13.29 *
1 From 2
Viewed